Need a pretty loveseat for indoors and outdoors? Have a look at this tutorial from rogueengineer.com and read the full tools and materials list in the source, and let’s get started. Drill pocket holes and assemble sides using 2-1/2’’ pocket screws, then pre-drill and install arm using 2-1/2’’ wood screws. Drill pocket holes and assemble frame and back using 2-1/2’’ pocket screws. Drill pocket holes and assemble rear support using 2-1/2’’ pocket screws. Set each 2×4 slat support 1’’ below the top of the 2×6 that it attaches to and install using 2-1/2’’ wood screws. Cut one end of each 1x4x15-1/4’’ board at 17 leg. Keep reading the detailed tutorial at rogueengineer.com.
