This cool table is inspired by some pieces from IKEA, so take 1”x 12 “x 6’ whitewood pine boards, 1”x 4” X6’, a handsaw, 1 box of 1 ¼” wood screws, a power drill, ½ pt polyurethane clear satin finish, a quality synthetic paintbrush, Ikea Nipen legs, 120 grit sandpaper, a mouse sander, 220 or lower grit sandpaper. Lay the table top side facing down and using two of the 1x4s lay each one on the long side of your tabletop. This will be the supporting frame underneath the table. Now measure and cut the third 1×4, so you will have 3 pieces that will fit in between the frame – one on each end and one in the middle. Read the rest of the tutorial here and finish the table.
